您好,欢迎访问重庆液压升降机械销售中心官网!

重庆液压升降机械销售中心

 多年以来一直专注于生产销售液压升降机械设备

全国24H热线服务电话:

152-5313-4653

您当前的位置 :首 页 > 客户案例 > 引起升降货梯机身发热的原因有哪些?

引起升降货梯机身发热的原因有哪些?

2022-11-15 09:57:38
292次

1.超载运行,液压升降货梯在超载情况下会对油缸及电机造成沉重负担,久之运行,很容易造成机身温度偏高,应及时卸载,控制在额定载荷范围内。Overload operation, hydraulic lift cargo lift in the case of overloading the cylinder and the motor will cause a heavy burden, a long run, it is easy to cause the body temperature is high, should be promptly unloaded, controlled in the range of rated load.

2.升降货梯铝材间卡住或摩擦力过大,造成这一现象的原因多是铝材间进入杂物,应当进行清理。Lift cargo aluminum or aluminum is too large, the cause of this phenomenon is caused by the material into the debris, it should be cleaned.

3.油缸或电机损坏,作为液压升降货梯的核心部分,出现温度过高,这是必须检查的。Cylinder or motor damage, as the core part of the hydraulic elevator, the temperature is too high, it is necessary to check the.

4.烈日下暴晒加之频繁工作,要掌握好时间,间歇性工作,液压升降货梯在夏季连续性工作,由于散热不及时,容易烧坏电机。Under the hot sun and frequent work, must grasp the time, intermittent work, hydraulic cargo lift continuous work in the summer, because the heat is not timely, easy to burn out the motor.

下一篇:已经没有了
快速导航

· 产品展示                · 客户案例              

· 厂容厂貌                · 新闻动态              

· 行业知识                · 常见问题             

· 关于悦翔                · 联系我们             

联系我们

公司名称:重庆液压升降机械销售中心

联系人:安经理

电话:152-5313-4653

邮箱:347299818@qq.com

地址:重庆市经济技术开发区

手机移动端

微信扫一扫