液压升降平台焊接口处需要注意哪些问题？

液压升降平台http://www.jnyuexiang.com/的安装过程中需要使用焊接技术，来进行接口处的缝合，所以焊接技术对升降机的质量也是一个重要的原因，顾客可以通过焊接点的外观来初次检验升降机的质量和性能以及结实程度。
Hydraulic lifting platform installation process requires the use of welding techniques for suture interface, it lifts the quality of welding technology is also an important reason, customers can look to the initial test weld quality and performance as well as strong degree of lift .
   
可以通过双眼观察液压升降平台http://www.jnyuexiang.com/焊接缺口处的焊接点分布，焊接处间隔最长一般不超过600mm，由于钢铁器材容易受到热胀冷缩的影响，所以焊接不会完全闭合，最窄不会低于400mm，顾客可以通过强光照明或者使用放大镜来增加肉眼观察能力来发现焊接口处的缺陷。如果肉眼借助放大镜都无法观察清楚的地方，例如直径很小的刚才管子或者精密部件的小焊缝，这种地方可以使用工业内窥镜来进行查看。液压升降平台焊接处的检查工作主要涉及以下地方：是否融合焊接剂、焊接处是否出现裂纹以及是否有气泡等一切不正常的地方。
Can be observed through the eyes weld welding notch hydraulic lifting platform distribution, welding longest intervals of not more than 600mm, due to iron and steel equipment susceptible to thermal expansion and contraction, so welding is not completely closed, the narrowest of not less than 400mm, customers can increase the capacity by the naked eye or using a magnifying glass to light illuminated welding defects found at the mouth. Magnifying glass can not be observed clearly places such small diameter pipes or just a small weld precision parts, industrial endoscope can use this place to see if the aid visually. Check the hydraulic lifting platform welding work mainly involves the following places: whether fusion solder, weld cracks and whether there is a bubble and all the unusual places.