固定升降机组装过程有哪些细节？

固定升降机http://www.jnyuexiang.com/是我们各行各业中离不开的重要作业设备，但是我们在安装固定升降机时应注意的细节有哪些呢？

固定升降机在安装的主要任务是借助一些工具和仪器，采用先进的操作方法，将设备正确的安装在预定的位置上，但是由于机械设备的种类繁多，大小各异，质量相差悬殊，所以除大多数中小型机械设备由制造厂装配好整体装箱运输外，一些大型机械设备为了运输方便，常常拆成部件甚至零件运输。
Fixed lifts in the main task is to install with some tools and equipment, the use of advanced methods of operation, the device is properly installed in a predetermined position, but because of the type of machinery and equipment of various, different sizes, quality disparities, so in addition to large most small and medium sized mechanical equipment is assembled by the manufacturer transport packing whole, a number of large machinery and equipment in order to facilitate transportation, often split into component parts and even transportation.

固定升降机http://www.jnyuexiang.com/由于运输或经过一定时间的存放，零部件的表面可能生锈或被尘土和脏污所污染，内部的保护油也可能变质，因此将其清洗干净后，组装成一部整体的固定升降机，此外固定升降机在制造上的缺陷及在运输、存放中所造成的变形、损坏或丢失等，也需在安装过程中及时检查和处理。
Fixed lift due to possible rust or dust and dirt contaminated by transport or storage after a certain time, the surface of parts, the internal protection oil may deteriorate, so it is cleaned, assembled into an overall fixed lifts, also fixed lift in the manufacturing defects and deformation in the transport, storage medium caused by damage or loss, but also the need for timely inspection and handling during installation.